Adhesive Fiber Creasing Matrix

A fiber based matrix used on auto platens; especially suitable for fragile or recycled board.
Combining vulcanized fiber with modern materials, Graphic Fiber series offers up to 2 or 3 times the durability of plastic matrices.

Quick Details

• Place of Origin: Beijing, China (Mainland)

• Brand Name: Graphic

• Model Number: GRB0.4x1.5 F

• Channel Height: 0.4 mm

• Channel Width:1.5 mm

• Locator Color: White

• Matrix Color: Green

• Application: For box making

• Machines: Semi-Auto/Full Auto Platens

• Certificate: SGS

Packaging & Delivery

Features:

1.Precise locator – ensures perfect registration each time.

2.Low profile chamfer – board flows freely over the matrix; board marking is reduced.

3.Yellow Finger lift adhesive tape– backing paper easily and quickly removed.

4.High tolerance & accurate channel depth and width.

5.Removes cleanly from the plate after use, will not move about during machine run, quite sticky.

6.Full range of sizes available to suit all board types, internal chamfers, for low quality boards, and off-centers for close creasing rule.

7.High quality fiber construction, Extremely durable.

Size Table

Operation Procedure

1. Measure the length of the creasing rule   
2. Mark the measurement and cut the matrix 
3. Mount the cutting piece into the creasing rule with locator 
4. Remove all of the backing tapes          
5. Transfer the matrix to the die cutting steel plate 
6. Remove all of the locators               
7. Miter the sharp angle 

Calculation Formula

Method to choose creasing matrix size for cardboard paper. Size table ( subject to 23.8 mm die-cutting rules)

For instance: the thickness of the cardboard: 0.52mm; the thickness of creasing rules: 0.71mm, according to calculation formula: A=0.52˜0.5(mm); B=0.52 x 1.5 +0.71 = 1.49 ˜1.5(mm),so we should choose the size of 0.5 x 1.5.
 Method to choose creasing matrix size for corrugated paper. Size table ( subject to 23.8 mm die-cutting rules)

Remarks: the above blanks just for reference and the exact specification suitable for your job should be chosen according to your actual conditions and material thickness.